CUTTING NOZZLES FOR GASIQ 62-5, 49-3 AND S80 INJECTOR

(The nozzles are also compatible with torches from other manufacturers.)

1. Cutting nozzle Propane NX

Cutting nozzle with a general preheat for relatively clean plates. This nozzle is particularly well-suited to cutting scrap.

Part.No Material Thickness Working Pressure Fuel gas Working Pressure Oxygen 64150100 5-10 mm 0,3-0,8 bar 1,5-2,0 bar 64150200 10-15 mm 0,3-0,8 bar 2,0-3,0 bar 64150300 15-25 mm 0,3-0,8 bar 2,5-3,5 bar 64150400 25-50 mm 0,3-0,8 bar 3,0-4,0 bar ​​​​64150500 50-75 mm 0,3-0,8 bar 3,0-4,5 bar 64150600 75-150 mm 0,3-0,8 bar 3,5-5,5 bar 64150700 150-200 mm 0,3-0,8 bar 4,5-5,5 bar

2. Cutting nozzle Propane NFF

Capabilities are as for NX but with more preheating.

Part.No Material Thickness Working Pressure Fuel gas Working Pressure Oxygen 64140100 6-25 mm 0,3-0,8 bar 2,5-3,5 bar 64140200 25-50 mm 0,3-0,8 bar 3,0-4,0 bar 64140300 50-75 mm 0,3-0,8 bar 3,0-4,5 bar 64140400 75-150 mm 0,3-0,8 bar 3,5-5,5 bar 64140500 150-200 mm 0,3-0,8 bar 4,5-5,5 bar 64140600 200-300 mm 0,3-0,8 bar 5,0-6,5 bar

3. Cutting nozzle Acetylene 6290

A two-piece acetylene tip with a heavy preheat to facilitate cutting steel that is painted, rusted or has a heavily scaled surface.

Part.No Material Thickness Working Pressure Fuel gas Working Pressure Oxygen 64180100 5-10 mm 0,3-0,8 bar 1,0-2,0 bar 64180200 10-15 mm 0,3-0,8 bar 1,5-2,5 bar 64180300 15-25 mm 0,3-0,8 bar 2,0-3,5 bar 64180400 25-50 mm 0,3-0,8 bar 3,0-4,5 bar ​​​​64180500 50-100 mm 0,3-0,8 bar 3,0-4,5 bar 64180600 100-175 mm 0,3-0,8 bar 3,5-5,5 bar 64180700 175-250 mm 0,3-0,8 bar 4,5-5,5 bar 64180800 250-300 mm 0,3-0,8 bar 5,0-6,5 bar